|Min. Order:||1 Set/Sets|
|Delivery Time:||60 Days|
Model No.: 50ZLJ-40C
Impeller Number: Single-Stage Pump
Working Pressure: Middle Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Mounting Height: Suction Centrifugal
Usage: Ash Pumps
Pump Bearing Brands: SKF, NSK Or Reputed Chinese Brands
Motor Brands: ABB, Siemens，WEG Or Reputed Chinese Brands
Wetted Parts Materials: HT200、Z-I、Z-II、Z-III、Cr26、Cr30、CD4MCu、316L、304 Etc.
Packaging: Wooden case or Frame steel Case
Productivity: 1100000 sets/year
Place of Origin: Zigong,Sichuan,China
Supply Ability: 110000 sets/month
HS Code: 8413709990
1.ZLX type pump is the new type vertical submerged slurry pump designed according to the standard JB/T8096-1998 of our country. This series pump by direct connection and used to deliver the liquid with suspended solids in the medium. The maximum weight concentration of liquid delivered is ≤60% and the medium temperature is ≤80℃. Allowing a small amount of large solid particles in, but its diameter should be smaller than 80% of the minimum flow surface. This pump is widely applied to chemical industry, electric power, oil industry, mining, cement etc.
2.This pump uses double supporting cantilever structure that improves the reliability and stability of pump operation. The installation depth of pump (from pithead to impeller center) is 0.8, 1.0, 1.2 meters. When the total underwater depth (from the installation wellhead to the pump inlet) is less than 1.5 m, the overall structure is adopted.. If the submerged total depth is above 1.5 meter, the pump uses inlet suction pipe structure which guarantees the suction performance and the length of suction pipe should below 2 meters. To make the pump normal operation when it starts and never occurs cavitation, pump has to start at high water level, that requires the liquid level should be 250-300 mm higher than the impeller center when pump starts, and pump can be low water level when it operates. This pump uses the structure with no shaft seal and there is no need to use external flushing water and more water-saving. Flow passage components use wear-resisting alloy casting, so the using life is longer than normal metal.
Submerged Pump With High Quality Parameters:
The Configurations of Well Performance Duty Pump: