Horizontal Pump for Flue Gas Desulphurization

Basic Info

Model No.: ZTD900-1050

Impeller Number: Single-Stage Pump

Working Pressure: Middle Pressure Pump

Influent Type of Impeller: Single Suction Pump

Position of Pump Shaft: Horizontal Pump

Pump Casing Combined: Horizontal Split Pumps

Mounting Height: Suction Centrifugal

Impeller: Semi-Open

Usage: Pump

Pump Bearing: SKF, NSK Or Reputed Chinese Brands

Materials: Anti-Wearing Cast Iron, CD4MCU, Cr26, Cr30, Zg40mn2

Shaft Sealing: Mechanical Seal And Packing

Transport Package: Standard Seaworthy Packing

Additional Info

Packaging: Wooden case or Frame steel Case

Productivity: 1100000 sets/year

Brand: GAOFENG

Transportation: Ocean,Land,Air

Place of Origin: Zigong,Sichuan,China

Supply Ability: 110000 sets/month

Certificate: ISO9001

HS Code: 8413709990

Port: Shanghai,Guangxi,Chengdu

Product Description

1. Flow rate:Q=700~14000 (m³/h)
2. Total head:H=15~63 (m)
3. Speed:n=420~980rpm
4. S.g.:γ ≤1.5 
5. Temperature:T=0~120ºC 
6. Pump diameter:300~900mm

1. Elaborately designed based on the characters of flue gas desulfurization of thermal power plant to meet the requirements of a facility below 1000 MW.
2. Hydraulic models are CFD optimized to have excellent performance of anti-cavitation.
3. Specially designed mechanical seal for flue gas desulfurization process. 
4. The impeller position can be adjusted by the bearing housing,this brings a shortcut to recover the pump performance under a slightly abrasion.
5. Axial adjusting structure to maintain the distance between impeller and front cover plate to keep a high efficient operation.
6. The specially designed anti-corrosive and anti-abrasive duplex stainless white iron for FGD process,which has the advantages of both duplex stainless steel and white anti-abrasive iron alloy.

1. All metal materials for pump set,without any lining rubber or other high polymer material.
2. Pump casing adopts duplex stainless steel of 2605N and 2205,which have excellent resistant performance of chloride ions and sulfate ions,and therefore is the first choice of desulfurization pumps.
3. Front and back open structure,the rotary part can be removed from the casing without dismantling the pipelines.
4. Cartridge mechanical seal with internal or external flushing plans.
5. The bearing part is back pull structure,which is assembled in the bearing housing.
6. Transmission: directly coupled and gear box drive.

The same Packing & Delivery as Low Pressure Slurry Pump: